|Name:||2-12 Inch Down The Hole Hammers DTH Drilling Tools For Water Well Drilling||Meterial:||Carbon Steel|
|Size:||2-12 Inch||Color:||Black Or Request|
|Application:||Underground Mining, Quarries, Hydraulic And Hydro-Power Engineering, Water Well Drilling, Mineral Exploration, Anchoring Hole Drilling, Geothermal Engineering, Subway Excavation, Another Civil Engineering||Advantage:||High Flatness, Smooth Hole Wall, High Rigid Of Drill Rod And Hammer, Independent Of High Axial Thrust, No Limit Of Drilling Depth, Low Cost Of Devices And Easiness To Maintain|
oil well drilling tools,
water well drilling tools
DTH drilling tool is a kind of drilling system which uses compressed air as motivation, makes drilling impact motivation parts down the hole, to control the piston reciprocating motion by the distribution device in the hammer, and then impacts the DTH bit in the front of the hammer to transit the impacting power to the bit. The DTH bit in the front of the hammer breaks the rock to drill hole.
|Hammers||Bit Shank||Connection Thread||Suitable bit||Working pressure||Air consumption|
|API 2 3/8"Reg||￠90-￠110mm||1.0-1.5Mpa||1.0Mpa||4.5m3/min|
|API 2 3/8"Reg||￠110-￠135mm||1.0-2.5Mpa||1.0Mpa||6m3/min|
|API 2 3/8"Reg/API 3 1/2"Reg||￠135-￠155mm||1.0-2.5Mpa||1.0Mpa||9m3/min|
|API 3 1/2"Reg||￠155-￠190mm||1.0-2.5Mpa||1.0Mpa||10m3/min|
|API 4 1/2"Reg||￠195-￠254mm||1.0-2.5Mpa||1.0Mpa||15m3/min|
|API 6 5/8"Reg||￠254-￠311mm||1.0-2.5Mpa||1.0Mpa||22m3/min|
|API 6 5/8"Reg||￠305-￠445mm||1.0-2.5Mpa||1.0Mpa||30m3/min|
1. Valveless air distribution. More reliable.
2. Simple design of the piston. Long life.
3. More efficient energy transfer, fact drilling speed, lower air consumption and lower oil consumption.
4. Fewer internal parts, simple structure, long life, less failure and easier to maintain because all the parts are heat treated.
5. Easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi-step thread.
it has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. At the drilling hole of dia.105mm-dia.254mm, a plenty of the DTH drilling tools are used.
At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.
Packaging and Shipping:
Packaging: Carton+plywood case, or as request.
Shipping: By air, by sea, by express, or as request.
Contact Person: admin