|Name:||3 1/2 Inch 90mm Stepped Blade Drag Drill Bit For Water Well Exploration Drilling||Material:||High Manganese Steel|
|Formation:||Soft And Middle Rock||Application:||Mining, Water Well Drilling, Exploration Drilling|
|Diameter:||3" To 17 1/2"||Processing Type:||Forging|
|Size:||3 Inch To 17 1/2inch||Connection Thread::||API 2 3/8, API 3 1/2", 4 1/2’’ API Reg, Etc.|
step drag bits,
chevron drag bit
Drag Bits are the perfect solutions for soil, sand, sticky clay, and grouting drilling. They are designed for higher penetration rates in softer unconsolidated formations, provide lower costs per foot. Drag Bits are more aggressive than tricone bits, and have higher speed while lower cutting action.
The Drag Bits can penetrate softer formations such as stiff clays and mudstones very quickly. Usually used for construction or other site investigation projects. It has two types, Step Type and Chevron Type.
Generally, available with following sizes:
|Drag Bit Size(Inch)||3"(76MM)~17 1/2"(444.5MM)|
|Drag Bit Connection||2 3/8"~6 5/8" API reg pin|
|Drill rods dia.||76mm, 89mm, 114mm, etc|
|Drag Bit Formation||soft ,medium soft ,hard,medium hard,very hard formation|
|Item||three wings drag bit|
|Type||Chevron and Step type|
|Wings||2, 3 and 4 wings|
|Size: from 3||3"(76MM)~17 1/2"(444.5MM)|
|Thread||2 3/8, 3 1/2, 4 1/2, 5 1/2, 6 5/8 API Reg. Pin|
1, All drag bits blades originate from high quality of heat treated alloy steel forgings.;
2, Carbide inserts are individually brazed using 50% nickel silver alloy;
3, All drag bits are built to the gauge tolerances, use high grade carbide inserts only;
4, Powerful technology support and mature manufacturing experience;
5. Strict quality control before deliverying;
The drag bit is designed for use in soft formations such as sand, clay, or some soft rock.Step type bits are the most common type of drag bit used widely for soft to medium formations. Step-type drag bits are very effective in drilling soft and unconsolidated material. They are available in a full range of sizes from 3" to 17 1/2".The design of step-type drag bits provides for fast drilling penetration and requires only moderate drilling weight for proper operation. A large center flushing hole is incorporated into our design for efficient removal of cuttings.
Chevron-type drag bits are recommended for drilling in slightly harder and more consolidated materials. Best suited for abrasive conditions, Chevron-type drag bits are also available in a full range of sizes from 3" up to 17 1/2".The clean design, use of premium tungsten carbide and rugged construction of these fine drilling tools ensures effective performance in a variety of ground conditions.
Packaging and shipping
Packaging: Carton+plywood case, or as request.
Shipping: By air, by sea, by express, as request.
Sollroc , with more 10 years of experience ,is one of the professional manufacturer and supplier of high performance rock drilling tools like: DTH hammers and bits, RC hammers and bits, DTH drill rods and top hammer drilling tools. Our tools are widely used in different drilling applications including mining, quarrying, water well drilling, geotechnical industries and etc.
Sollroc is specialized in designing, manufacturing and developing equipments and accessories for standard models as well as the special needs of clients and provides them with the best suggestions and solutions. We practice strict and stringent quality control during manufacturing and adhered to recognized and approved quality control systems. Each of our products follows the quality requirements and procedures to ensure finished products are durable and superior up to standard.
We are dedicated to offering our customers only premium quality products and services to enable them to achieve the highest possible productivity for their business and projects. If you are looking for the best, fastest and most productive drilling tools in the world, Sollroc should be your best choice and preference.
Contact Person: Ms. Ling Bo