|DHD 340 Dth Hammer
|Quarrying, Construction, Civil Engineering, Mining,
|Mining, Water Well Drilling, Geothermal Drilling
|Granite, Limestone, Quartz, Etc
|Hign Abrasion Resistance
|Black Or As Request
numa dth hammers,
water well drilling hammer
In DTH drilling, the drill string rotates while the drilling hammer continuously strikes down into the rock. Inside the hammer, a piston powered by compressed air gives the drill bit its striking power. This combined with the rotational movement means the rock is crushed in a very efficient manner. DTH drilling tool is a kind of drilling system which uses compressed air as motivation, makes drilling impact motivation parts down the hole, to control the piston reciprocating motion by the distribution device in the hammer, and then impacts the DTH bit in the front of the hammer to transit the impacting power to the bit. The DTH bit in the front of the hammer breaks the rock to drill hole.
HD45 DTH hammer
|Top sub thread
|API 2 3/8”REG
|Impact rate at 1.4Mpa
|Recommended rotation speed
|Air consumption 1.8Mpa
1. Simple design of the piston. Long life. Valveless air distribution. More reliable.
2. More efficient energy transfer, fact drilling speed, lower air consumption and lower oil consumption.
3. Fewer internal parts, simple structure, long life, less failure and easier to maintain because all the parts are heat treated.
4. Easy to disassemble because the top sub, the drive chuck and the external cylinder are connected by multi-step thread.
Advantages and application
It has the advantage of high flatness, smooth hole wall, high rigid of drill rod and hammer, independent of high axial thrust, no limit of drilling depth, low cost of devices and easiness to maintain. At the drilling hole of dia.105mm-dia.254mm, a plenty of the DTH drilling tools are used.
At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.
Sollroc DTH hammers
|API 2 3/8"Reg
|API 2 3/8"Reg
|API 2 3/8"Reg/API 3 1/2"Reg
|API 3 1/2"Reg
|API 4 1/2"Reg
|API 6 5/8"Reg
|API 6 5/8"Reg
Face type and button shape selections for DTH bits
Sollroc can supply DTH hammers and bits from 2"-18" with type DHD, SD, QL, Mission, Numa,etc.
Sollroc , with more 10 years of experience ,is one of the professional manufacturer and supplier of high performance rock drilling tools like: DTH hammers and bits, RC hammers and bits, DTH drill rods and top hammer drilling tools. Our tools are widely used in different drilling applications including mining, quarrying, water well drilling, geotechnical industries and etc.
Sollroc is specialized in designing, manufacturing and developing equipments and accessories for standard models as well as the special needs of clients and provides them with the best suggestions and solutions. We practice strict and stringent quality control during manufacturing and adhered to recognized and approved quality control systems. Each of our products follows the quality requirements and procedures to ensure finished products are durable and superior up to standard.
Contact Person: Ms. Ling Bo