|Application:||Quarrying, Construction, Civil Engineering, Mining,||Usage:||Mining, Water Well Drilling, Geothermal Drilling|
|Product Name:||DTH Hammer||Rock Formation:||Granite, Limestone, Quartz, Etc|
|Shank:||SD8||Advantage:||Hign Abrasion Resistance|
|Color:||Black Or As Request||Rock Hardness:||Granite, Limestone, Quartz, Etc|
|Machine Type:||Drilling Tool,Drilling Equipment,Downhole Tools,Mining Machine Parts||Use:||Well Drilling,Ore Mining,Coal Mining,Coal/Ore Mining,quarry|
Shank SD8 Down The Hole Hammer,
2.5Mpa Down The Hole Hammer,
4 1/2'' API REG Thread DTH Hammer
Drill Hammer Shank SD8 With Thread 4 1/2'' Api Reg For Down The Hole Drilling
SOLLROC company makes and supplies the finest and most efficient Down-the-Hole (DTH) hammers and bits for the mining, construction and water well industries. Sollroc DTH hammers transmit intensive impact energy with low energy loss. This results in good rock breakage, high penetration rates and high productivity. The equipment is designed to give optimal hole quality, reliability, and long service life, as well as the best blasting results and low total operation cost.
1. Advanced hammer designs with high power and air efficiency increases productivity
2. Tailored product offering covers all your applications and conditions
3. Easy service and maintenance designs reduces machine downtime
4. Generic and proprietary shank options give you flexibility and reliability
DTH Hammer specification:
Model: DHD380, COP84, SD8, QL80
Face shape Features
For high penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressures. Maximum hole deviation control.
The all-round application bit face special for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.
For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control.
This kind of face shape is suitable for very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
Double Gauge Face
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.
At present, DTH drilling tool is widely used in underground mining, quarries, hydraulic and Hydro-Power Engineering, water well drilling, Mineral exploration, anchoring hole drilling, geothermal engineering, Subway excavation, another civil engineering.
DTH is one of the most efficient ways of drilling rock, using a rapid hammer action to break the rock into sizeable chips which are then evacuated from the bore hole by the air exhausted from the DTH Hammer. The technique provides fast drilling of accurately aligned, straight and clean holes in most ground conditions.
At sollroc, customer satisfaction is our top priority. Our sales team takes a proactive approach in meeting customers’ needs. We take the time to get to know you and learn about your operations so we can better assist you. We strive to meet customers’ needs by supplying the tools and equipment you need when you need them, providing product support, and following through with excellent customer service every step of the way.
Contact Person: Ms. Ling Bo